Showing posts with label Ubuntu. Show all posts
Showing posts with label Ubuntu. Show all posts

Sunday, July 18, 2010

[How To] Jailbreak iOS 4.1 Beta 1 With Sn0wbreeze 1.8

Sn0wBreeze 1.8 is now available for download to help in jailbreaking the iOS 4.1 beta firmware. Using Sn0wBreeze v1.8 you can jailbreak iOS 4.1 beta on the iPhone 3GS (Old BootRom), iPod Touch 2G (non-MC), and iPod Touch 3G. Keep reading for instructions below:

Sn0wBreeze 1.8 Supports

  • iPhone 3GS (old bootrom)
  • iPod touch 2G (non MC model)
  • iPod touch 3G

IMPORTANT:

  • Your iDevice MUST be pre-jailbroken on iOS 4.x.
  • If you plan on unlocking your iPhone, STAY AWAY from iOS 4.1 beta.
  • It does NOT hacktivate iPhone so legit Carrier users only.
Follow the steps below to create custom firmware of iOS 4.1 beta and jailbreak iPhone 3GS (Old BootRom), iPod Touch 2G (non-MC), and iPod Touch 3G.

Disclaimer:

This iPhone guide is for testing and educational purposes only. Follow it at your own risk, we cannot be held responsible if anything goes wrong.

iphone 4 cases

Jailbreak iOS 4.1 Beta with Sn0wBreeze 1.8

NOTE:

All the required stuff is linked below under Downloads.

Step 1

Install the iTunes and .NET Framework 3.5 (required for Sn0wbreeze). Make sure you’ve installed the iTunes 9.2. Open the iTunes and backup your iPhone data. Now you can proceed. (Download Links below)

Put the iOS 4.1 beta Firmware and Sn0wBreeze v1.8 into a folder on your desktop. (Download links below)

Step 2

Run the Sn0wBreeze v1.8 for iOS 4.1 and hit next button.




Step 3

Choose Simple Mode. Click the Next Arrow button.


Step 4

Sn0wBreeze will ask for the iOS 4.1 beta IPSW file for your iPhone or iPod Touch. Click on the Browse button and navigate to the folder where you put your iOS 4.1 IPSW file and select it.


Step 5

Sn0wBreeze will verify your selected firmware 4.1 beta file. Then Hit Next.


Step 6

Hit the Start button. SnowBreeze will start building custom firmware for your iPhone that we will use later to jailbreak iOS 4.1.


Step 7

Once the custom firmware IPSW file building process is complete, Sn0wbreeze will prompt you to enter iDevice into recovery mode.


Step 8

Connect your iPhone to iTunes and select your iPhone from the left navigation pane in iTunes. Hold Down the SHIFT key on your keyboard and hit the Restore button (SHIFT + Restore)

Step 9

Now the iTunes will ask for the iPSW firmware file. Browse to the custom firmware iOS 4.1 that you build using Sn0wBreeze 1.8 and select it. iTunes will now restore your iPhone with custom iOS 4.1 beta created with Sn0wBreeze. Once the process is done, your iPhone will restart automatically. There you have it, you have a fully jailbroken iPhone / iPod Touch with iOS 4.1 beta.

Download Sn0wBreeze v1.8 Beta:

Sn0wBreeze is available for download for Windows users only:

Jailbreak iOS 4.0

Stay tuned to us for more jailbreak news and info. by following us on Twitter and/or subscribing to our RSS feeds.

Monday, July 5, 2010

HTC HD2 Android and Ubuntu Builds Now Available

As we slowly approach the end of the Windows Mobile handset legacy, some of the Windows handsets have been spotted running open sourced operating systems shortly after their release. With Windows Phone 7 around the corner, the HD2 will surely be one of the last phone spotted running Windows Mobile, but you can extend the life of the phone by installing an OS of your choice between Ubuntu Karmic Koala or Android 2.1 The builds have been made for general consumption thanks to the folks over at XDA developers and installing them is something you should attempt to do at your own risk. Luckily, neither of them touch the phone's internal flash, so you can always just reset the phone to the comfort of Windows Mobile. If you are feeling adventurous then try them out and drop us a comment with your experience.


Note:

* None of the current releases will touch your internal flash. All changes made in Linux are stored inside files on the Storage Card. After a soft reset (press little red button under battery cover) you get back to your WM 6.5 !
* All running windows mobile programs are closed without notice when you boot Linux. Save your documents before running HaRET
* Make sure you have at least a 2.08 radio rom version. If you have an older version you might not be able to boot Linux
* Note that all of this is work in progress. Don't expect a perfectly smooth operating system yet

Ubuntu:

Ubuntu 'Karmic Koala' for HD2 version 0.1

Needs Storage Card with at least 2GB free space. Recommended is a fast Storage Card (Class 4 is ok)
This is intended to be used as a netbook/desktop type setup with keyboard and mouse connected via USB. Check this site for information on how to do this.

Be sure to read included README.txt for install instructions, features and developer information.
Quick instructions: Put the ubuntu directory into the main/root directory of your Storage Card and tap HaRET executable.
password: ubuntu
use shutdown button to stop the system cleanly

Size: 635M
md5sum: 327a4b2c17e14dd5649964fe18f837e9
Mirrors:
http://linuxtogo.org/~lgorris/hd2/hd2-ubuntu_0.1.zip
http://gamesquare.co.uk/hd2-ubuntu_0.1.zip

Android:

Global instructions: Just extract to Storage Card root directory and run HaRET executable.
Note this is not specifically designed for the hd2. It is just the hd2 kernel with random android rootfilesystems - It makes no sense to discuss usability of those builds

Android build with HTC sense (tm)
composed by DarkStone1337
http://gamesquare.co.uk/LEO_SENSE.7z

Different random build
http://media2a.com/android/Android_Boot_Test_TS.zip
Mozy Remote Backup.  Free.Automatic.Secure.

Builds for Advanced Users:

zImage (latest kernel build)
http://linuxtogo.org/~lgorris/hd2/zImage

HaRET (bootloader)
http://www.netripper.com/leo/haret-p...D8250-ONLY.exe

startup.txt (bootloader configuration)
http://linuxtogo.org/~lgorris/hd2/startup.txt

rootfilesystem (initrds etc.)
Let us know how it goes in the comments section below, and stay tuned for more news and info by following us on Twitter and/or subscribing to our RSS feeds.

Monday, March 15, 2010

Gnome Gmail: Gmail and Linux Integration Made Easy


If you are a savvy Linux user, and you use Gmail as a preferred email app - you might be one of the many who are annoyed with the minor snags that make the app unappealing, like - no coverage for right click file sending and complex mail links. Gnome Gmail does a much better job of integrating Gmail on Linux platform.

Download a DEB (Ubuntu/Debian) or RPM (Fedora/openSUSE) package from the site, install it, and then head to your Preferred Applications preference (in Preferences, under the System menu in Ubuntu). Set Gmail as your "Mail Reader," and now it should really respond like a desktop client—on email links in every browser, when you right-click a file and select "Send to," and with full functionality when email links include cc: or pre-written subject lines.

Google Apps users, you're not left out in the cold—hit the Configure link when you're asked to sign into Gmail on a right-click Send To action, and you can add your Google Apps login and make it the default.


Gnome Gmail is a free download for Linux systems running a Gnome Desktop.