Recently an app called Handy Light was found on the app store and it looked like an ordinary flashlight app for the iPhone. In reality, it was hiding a tethering feature using the SOCKS proxy. The app which was only 99 cents was only in the App Store for a short amount of time and was pulled by Apple. Many users have tried the tethering feature and mentioned that it works well. If you were one of the many users who managed to download the app before it was pulled and are unsure of how to get the tethering feature to work, check out our instructions below:
Set up an ad hoc Wi-Fi network on your computer (network name and password requirement are not needed).
Connect to the Wi-Fi network you just created on your iPhone through the Settings/Wi-Fi menu.
Tap on the blue arrow to the right of the selected Wi-Fi network, click Static in the IP Address menu and enter the following IP address (you can laugh at the irony): 13.37.13.37
Next, enter 255.255.255.0 in the Subnet Mask field.
Back out of the Settings menu to ensure these settings are saved.
Go to your Mac or PC and change the network settings to use the SOCKS Proxy and enter 13.37.13.37 as the Socks Proxy Server address and 1337 as the port. On our Mac laptop, this is what the resulting screen looks like:
Be sure to apply/save these settings.
Go back to your iPhone and open the Handy Light app and tap the flashlight colors at the bottom in the following sequence: blue, yellow, red. Then tap the top right corner of the screen and the color should change to purple. Your iPhone is now capable of sharing its internet connection with the computer you set up.
Leave the app open and go to your computer and start browsing. As the video describes, we found that it took a few seconds for the connection to kick in but then it worked like a charm. Though many variables affect network speed tests, a quick test using Speedtest.net yielded 3.92 Mb/s down and 0.38 Mb/s up while tethered to our iPhone 4 through Handy Light.
Check out the video of the app in action below:
If you have any troubles in the setup process, drop us a comment and we'll try to help. As usual, stay tuned for more tips and tricks by following us on Twitter and/or subscribing to our RSS feed.
iPhone Dev Team has just reported that with iOS 4 or higher, Apple has started putting ‘soft’ SHSH blob checks in the firmware. What does this mean? It means that - like iPhone 4 and iPhone 3GS, if iTunes can’t get the SHSH blobs for iPhone 3G or iPod Touch 2nd generation (due to signing window being closed), the iTunes restore will error out.
According to Dev Team, soft SHSH blob check can be easily bypassed by using Redsn0w, PwnageTool and Sn0wbreeze.
Cydia has also started saving the SHSH blobs for iPhone 3G and iPod Touch 2G. Check the how to guide posted here.
Dev Team reports:
Those of you with jailbroken iPhone3G and ipt2G devices may now have noticed Cydia starting to save your SHSH blobs too, just like it does for iPhone3GS, ipt3G and later devices. That’s because starting with 4.0, Apple started putting a “soft” SHSH blob check in the firmware. The SHSH blob check is very real in the sense that if iTunes can’t get your blobs (because the Apple signing window has closed), the iTunes restore will error out. But it’s “soft” in the sense that those devices can always use redsn0w or PwnageTool to get past the error (the bootroms themselves for those devices don’t require blobs to be in the firmware files, unlike the newer bootroms). Furthermore, since the 3.x IPSWs for these devices don’t enforce it, you can always restore to 3.x IPSWs outside of any signing windows.
So, Cydia is doing this to allow you to continue to use iTunes to restore to 4.x on iPhone3G and ipt2g outside of Apple’s signing window without needing to use redsn0w or PwnageTool to get around Apple’s annoying new restriction.\
You can also backup your SHSH blobs locally by using TinyUmbrella, which can be found here.
Stay tuned for more news and info by following us on Twitter and/or subscribing to our RSS feeds.
Warning: Jailbreakers must stay away from iTunes 9.2.1 until further notice.
A new version of iTunes just arrived in Software Update. iTunes 9.2.1 to be exact. According to the update, the new version disables older versions of incompatible third-party plugins, addresses minor issues regarding dragging and dropping items, addresses a performance issue when doing a first sync to some devices, addresses an issue upgrading to iOS 4 on an iPhone or iPod Touch with encrypted backups, and fixes some stability and performance issues.
The new features and improvements include syncing with the iPhone 4, synchronization, and reading books on the iPhone or iPod Touch with iOS 4 and iBooks 1.1, organizing and syncing PDF documents as books for reading in iBooks 1.1, organizing apps on your iOS 4 home screens using iTunes, faster backups while syncing iPhone and iPod Touch with iOS 4, and album artwork improvements to make artwork appear more quickly when exploring the library.
More information about the security aspects of the update can be obtained from Apple's Support page.
Well, we all knew it was a matter of time before it happened and it finally did. The famous Chatroulette-like app, iChatr has been removed from the App Store by Apple because people were apparently inappropriately exposing themselves. Apple's app aproval team somehow forgot about it when it took Apple a gruesome 8 days to take it off the App Store. Ironically, its not like they didn't know about it with all the press coverage it got.
The folks over at 148Apps received an official statement from the developers, heres what it said:
"The iChatr application has currently been removed from the App Store due to reports of a number of users exposing themselves during the random video chat sessions. We are currently discussing possible solutions to the problem with Apple."
It's honestly not a surprise at all that people were pulling the usual Chatroulette style chats but we can imagine how much worse it might be with the portability of the iPhone 4 *shudders* What is surprising was the fact that Apple approved the app in the first place. It feels that Apple didn't realize the concept as the review team didn't have much time to chat using the program. If you want to give your front-facing camera a go, don't forget you can do so by calling 1-888-FACETIME.
Sn0wBreeze 1.8 is now available for download to help in jailbreaking the iOS 4.1 beta firmware. Using Sn0wBreeze v1.8 you can jailbreak iOS 4.1 beta on the iPhone 3GS (Old BootRom), iPod Touch 2G (non-MC), and iPod Touch 3G. Keep reading for instructions below:
Sn0wBreeze 1.8 Supports
iPhone 3GS (old bootrom)
iPod touch 2G (non MC model)
iPod touch 3G
IMPORTANT:
Your iDevice MUST be pre-jailbroken on iOS 4.x.
If you plan on unlocking your iPhone, STAY AWAY from iOS 4.1 beta.
It does NOT hacktivate iPhone so legit Carrier users only.
Follow the steps below to create custom firmware of iOS 4.1 beta and jailbreak iPhone 3GS (Old BootRom), iPod Touch 2G (non-MC), and iPod Touch 3G.
Disclaimer:
This iPhone guide is for testing and educational purposes only. Follow it at your own risk, we cannot be held responsible if anything goes wrong.
Jailbreak iOS 4.1 Beta with Sn0wBreeze 1.8
NOTE:
All the required stuff is linked below under Downloads.
Step 1
Install the iTunes and .NET Framework 3.5 (required for Sn0wbreeze). Make sure you’ve installed the iTunes 9.2. Open the iTunes and backup your iPhone data. Now you can proceed. (Download Links below)
Put the iOS 4.1 beta Firmware and Sn0wBreeze v1.8 into a folder on your desktop. (Download links below)
Step 2
Run the Sn0wBreeze v1.8 for iOS 4.1 and hit next button.
Step 3
Choose Simple Mode. Click the Next Arrow button.
Step 4
Sn0wBreeze will ask for the iOS 4.1 beta IPSW file for your iPhone or iPod Touch. Click on the Browse button and navigate to the folder where you put your iOS 4.1 IPSW file and select it.
Step 5
Sn0wBreeze will verify your selected firmware 4.1 beta file. Then Hit Next.
Step 6
Hit the Start button. SnowBreeze will start building custom firmware for your iPhone that we will use later to jailbreak iOS 4.1.
Step 7
Once the custom firmware IPSW file building process is complete, Sn0wbreeze will prompt you to enter iDevice into recovery mode.
Step 8
Connect your iPhone to iTunes and select your iPhone from the left navigation pane in iTunes. Hold Down the SHIFT key on your keyboard and hit the Restore button (SHIFT + Restore)
Step 9
Now the iTunes will ask for the iPSW firmware file. Browse to the custom firmware iOS 4.1 that you build using Sn0wBreeze 1.8 and select it. iTunes will now restore your iPhone with custom iOS 4.1 beta created with Sn0wBreeze. Once the process is done, your iPhone will restart automatically. There you have it, you have a fully jailbroken iPhone / iPod Touch with iOS 4.1 beta.
Download Sn0wBreeze v1.8 Beta:
Sn0wBreeze is available for download for Windows users only:
Apple has released iOS 3.2.1 and it is up for downloads. The update is compatible with both iPad Wi-Fi and 3G, and is now available through iTunes. Hook up your iPad, then click the Update button on the Summary tab to update the software.
All jailbreakers should STAY AWAY from iOS 3.2.1 until further notice.
Backup Your SHSH Blobs:
If you haven't done so already, make sure you get a backup of your SHSH Blobs, for further details check here.
As usual if you are looking to stay up to date with any news and info about jailbreaking and unlocking your iPhone 4 stay tuned by following us on Twitter and/or subscribing to our RSS feeds.
Apple has already released iOS 4.0.1 for the iPhone 4, 3GS, and 3G as well as the iPod Touch 2G and 3G and the update is up for downloads. You can download iOS 4.01 from the links below. The biggest kicker of the update was the fix to the reception issue.
To install iOS 4.0.1 on your device, connect your iPhone and/or iPod Touch to iTunes, a new firmware availability message will appear, then hit the "Download and Install" button. You can also download the iOS 4.0.1 firmware from the links below:
Warning:
All jailbreakers and unlockers should STAY AWAY from iOS 4.0.1 until further notice.
Download iOS 4.0.1 Firmware:
You can download iOS 4.0.1 firmware (IPSW files) for iPhone 4, iPhone 3GS and iPhone 3G from the links below:
Apple seeded iOS 4.1 and SDK 4.1 beta to the developers yesterday. With this upcoming release of the iOS 4.1 - a recent tweet from @planetbeing stresses the importance to back up your SHSH Blobs before updating to the new 4.1 firmware.
Saving your SHSH Blobs using TinyUmbrella is very easy, and takes hardly any time at all. One of the advantages of using TinyUmbrella to save your SHSH is that it bypasses the need for a jailbroken device. Also, when downgrading a device, TinyUmbrella sets up its own virtual server on your machine, and tells iTunes to connect to it via your hosts file. All this is automated and separate from the Cydia server, making it a lot simpler to downgrade. Because your SHSH files are saved locally, you may also back them up yourself, as oppose to them being stored on a server somewhere where you can't access them.
And, as usual if you are looking to stay up to date with any news and info about jailbreaking and unlocking your iPhone 4 stay tuned by following us on Twitter and/or subscribing to our RSS feeds.
We all knew it would only be a matter of time before something like this came up. iChatr, a new application that mimics the infamous Chatroulette, was recently released exclusively for iPhone 4 owners. The app utilizes the iPhone 4's front-facing camera to setup random video chats between users. Simply launch the app and you will be greeted by hopefully what is the shining face of some nice stranger. If you are not too fond of the new person you meet, all you have to do is simply swipe to meet the next lucky iPhone 4 user using iChatr as well. One thing that is kind of strange is that the developers don't have the audio feed connecting to the iPhone 4 speakers. To hear the the person on the other end of the chat, make sure you pop in your headphones. For those of you who migt be wondering, the one way random video chats do NOT work with older iPhone models. Did we forget to mention the app is free? If you are interested in checking it out, click here for the iTunes link. Be sure to share your experience by dropping us a comment below.
Sn0wbreeze 1.7 utility allows jailbreaking for the iPodTouch 2G (MC) on iOS 4.0 and is available for download. With this release, you can jailbreak iPodTouch 2G (MC) if it's on OS 3.1.2 or you've SHSH blobs saved for OS 3.1.2. In order to create a custom iOS 4 and go for 4.0 firmware successfully you have to be on OS 3.1.2+ jailbroken.
IMPORTANT:
iPhone 3GS with New BootRom, iPod Touch 3G, 2G (MC) users MUST be on firmware 3.1.2 or have SHSH blobs saved for it (needed for downgrade). Otherwise you’re still out of Luck. The exploit used in this hack has been patched in OS 3.1.3 so firmware 3.1.2 is a MUST.
If you’re not on 3.1.2 firmware or don’t have saved SHSH blobs for it, you’ll have to wait for the Spirit jailbreak update which is almost ready. I think they are waiting for the next firmware update (iOS 4.1 or iOS 4.01).
For iPhone 3GS (New BootRom), iPod Touch 3G, 2G (MC) users it’s a Tethered jailbreak. For those who don’t know, a tethered jailbreak device once turned off/Reboot/run out of battery, you need to connect it to computer and execute a tool to boot up the device.
Once jailbroken then you can unlock iPhone iOS 4 with UltraSn0w.
This guide is NOT for regular Windows users. So, proceed with precaution and follow the guide at your own risk. Let’s jailbreak iPod Touch 2G (MC) iOS 4 with Sn0wBreeze 1.7 and iBooty + Payload Pwner.
Sn0wBreeze 1.7 Supports:
iPod Touch 2G (MC)
iPod Touch 3G only if running firmware 3.1.2 and/or you have SHSH blobs for 3.1.2 (needed for downgrade)
iPhone 3GS only if running firmware 3.1.2 and/or you have SHSH blobs for 3.1.2 (needed for downgrade)
How To Jailbreak iOS 4 iPodTouch 2G (MC):
Required:
An iPod Touch 2G MC
3.1.2 already installed or 3.1.2 installed via SHSH blobs. <– Broken blackra1n’d devices will work. (Especially if Spirit messed you up!).
In General, Checkmark “Disable NOR Flash” <– THIS IS ESSENTIAL!!!!
Build it. It will be on your Desktop.
**CUSTOM BOOT LOGOS THAT ARE MADE IN sn0wbreeze WILL NOT WORK ON NEW BOOTROMS!**
**Mac Users : PwnageTool does not have this option. I don’t think it will ever be in there. Use a Windows Virtual Machine or friends PC to create your firmware.**
STEP 3: iBooty Prep.
Most of you know of the utility “iBooty” that I made for Aki_nG. It will work as long as you place all of the correct files there.
Download iBooty GUI here — iBooty V1.5 and Extract it.
Extract your Custom IPSW created by sn0wbreeze with 7-Zip or another un-archiver.
Grab the kernelcache and bring it into the same folder as ibooty.
Also grab iBEC from the folder “Firmware\dfu”.
Aswell as DeviceTree from the folder “Firmware\all_flash\all_flash.n88ap.production\DeviceTree.n88ap”
Rename your Kernel 4.0-Custom to “kernel.40″
Rename your iBEC 4.0-Custom to “ibec.40″
Rename your DeviceTree 4.0-Custom to “devtree.40″
Your folder should look like this:
- iboot.payload <– Created with Payload Pwner.
- devtree.40 <– Grabbed from Custom IPSW made by sn0wbreeze.
- ibec.40 <– Created with Payload Pwner.
- bspatch.exe <– Comes with iBooty.
- iBooty.exe <– Comes with iBooty.
- kernel.40 <– Grab from Custom IPSW made by sn0wbreeze.
- sn0w.img3 <– Comes with iBooty.
- wait.img3 <– Comes with iBooty.
STEP 4: Restoring to 4.0 + Booting
*Make sure your are on 3.1.2 when doing this*
Run iBooty and Select “Prepare Device for Custom Firmware“. Run the Process and if you see the image, you can proceed!
Now open iTunes and restore to the custom ipsw.
**When done, your device will go into recovery mode. It won’t boot.**
STEP 5 : Booting
Just Re-Run iBooty and select “Boot It”. If all goes well it will boot!
Enjoy! Hopefully iH8Sn0w can get a tool out there that will make all of this much easier.
To jailbreak iPhone 3Gs new bootrom, you can follow the guide here. And you are all set to enjoy! Hopefully the dev, iH8Sn0w can get a tool out there that will make all of this much easier.
If you have an iPhone 3GS old BootRom, you can jailbreak using Sn0wBreeze 1.6, PwnageTool 4 and then unlock iOS 4 on baseband 05.12.01, Baseband 05.13.04 and 05.11.07 using UltraSn0w 0.93. And, stay tuned for more jailbreak and unlocking info by following us on Twitter and/or subscribing to our RSS feeds.
Sn0wbreeze 1.7 utility allows jailbreaking for the iPodTouch 3G on iOS 4.0 and is available for download. With this release, you can jailbreak iPhone 3G with new bootrom if it's on OS 3.1.2 or you've SHSH blobs saved for OS 3.1.2. In order to create a custom iOS 4 and go for 4.0 firmware successfully you have to be on OS 3.1.2+ jailbroken.
IMPORTANT:
iPhone 3GS with New BootRom, iPod Touch 3G, 2G (MC) users MUST be on firmware 3.1.2 or have SHSH blobs saved for it (needed for downgrade). Otherwise you’re still out of Luck. The exploit used in this hack has been patched in OS 3.1.3 so firmware 3.1.2 is a MUST.
If you’re not on 3.1.2 firmware or don’t have saved SHSH blobs for it, you’ll have to wait for the Spirit jailbreak update which is almost ready. I think they are waiting for the next firmware update (iOS 4.1 or iOS 4.01).
For iPhone 3GS (New BootRom), iPod Touch 3G, 2G (MC) users it’s a Tethered jailbreak. For those who don’t know, a tethered jailbreak device once turned off/Reboot/run out of battery, you need to connect it to computer and execute a tool to boot up the device.
Once jailbroken then you can unlock iPhone iOS 4 with UltraSn0w.
Sn0wBreeze 1.7 Supports:
iPod Touch 3G only if running firmware 3.1.2 and/or you have SHSH blobs for 3.1.2 (needed for downgrade)
iPod Touch 2G (MC)
iPhone 3GS only if running firmware 3.1.2 and/or you have SHSH blobs for 3.1.2 (needed for downgrade)
How To Jailbreak iOS 4 iPhone 3GS (New BootRom):
Required:
An iPhone 3GS or iPod Touch 2G MC or iPod Touch 3G– new bootrom
3.1.2 already installed or 3.1.2 installed via SHSH blobs. <– Broken blackra1n’d devices will work. (Especially if Spirit messed you up!).
In General, Checkmark “Disable NOR Flash” <– THIS IS ESSENTIAL!!!!
Build it. It will be on your Desktop.
**CUSTOM BOOT LOGOS THAT ARE MADE IN sn0wbreeze WILL NOT WORK ON NEW BOOTROMS!**
**Mac Users : PwnageTool does not have this option. I don’t think it will ever be in there. Use a Windows Virtual Machine or friends PC to create your firmware.**
STEP 3: iBooty Prep.
Most of you know of the utility “iBooty” that I made for Aki_nG. It will work as long as you place all of the correct files there.
Download iBooty GUI here — iBooty V1.5 and Extract it.
Extract your Custom IPSW created by sn0wbreeze with 7-Zip or another un-archiver.
Grab the kernelcache and bring it into the same folder as ibooty.
Also grab iBEC from the folder “Firmware\dfu”.
Aswell as DeviceTree from the folder “Firmware\all_flash\all_flash.n88ap.production\DeviceTree.n88ap”
Rename your Kernel 4.0-Custom to “kernel.40″
Rename your iBEC 4.0-Custom to “ibec.40″
Rename your DeviceTree 4.0-Custom to “devtree.40″
Your folder should look like this:
- iboot.payload <– Created with Payload Pwner.
- devtree.40 <– Grabbed from Custom IPSW made by sn0wbreeze.
- ibec.40 <– Created with Payload Pwner.
- bspatch.exe <– Comes with iBooty.
- iBooty.exe <– Comes with iBooty.
- kernel.40 <– Grab from Custom IPSW made by sn0wbreeze.
- sn0w.img3 <– Comes with iBooty.
- wait.img3 <– Comes with iBooty.
STEP 4: Restoring to 4.0 + Booting
*Make sure your are on 3.1.2 when doing this*
Run iBooty and Select “Prepare Device for Custom Firmware“. Run the Process and if you see the image, you can proceed!
Now open iTunes and restore to the custom ipsw.
**When done, your device will go into recovery mode. It won’t boot.**
STEP 5 : Booting
Just Re-Run iBooty and select “Boot It”. If all goes well it will boot!
Enjoy! Hopefully iH8Sn0w can get a tool out there that will make all of this much easier.
To jailbreak iPhone 3Gs new bootrom, you can follow the guide here. And you are all set to enjoy! Hopefully the dev, iH8Sn0w can get a tool out there that will make all of this much easier.
If you have an iPhone 3GS old BootRom, you can jailbreak using Sn0wBreeze 1.6, PwnageTool 4 and then unlock iOS 4 on baseband 05.12.01, Baseband 05.13.04 and 05.11.07 using UltraSn0w 0.93. And, stay tuned for more jailbreak and unlocking info by following us on Twitter and/or subscribing to our RSS feeds.
Earlier today, a leading UK retailer slipped some details on what it expects from the next-gen iPod Touch and the iPhone 4 holds many of the clues. According to John Lewis who says "noises we're hearing from suppliers," the next-gen device will come equipped with a 5-megapixel camera, a front-facing camera, an LED flash, and the capacity to capture video in HD (720p probably), as well as including FaceTime Wi-FI video chat. With support for iOS 4 (which should also be hitting the iPad relatively soon), the next gen iPod Touch will offer the same movement sensors as the iPhone 4. Everything seems pretty reasonable and pretty accurate as games and other titles designed to take advantage of the iPhone's new accelerometer and gyroscope will be hitting the App Store, requiring the hardware to be able to support the features to be a contender.
This whole rumor suggests that the device will probably be powered by the A4 processor that Apple utilizes in it's iPad and iPhone 4 as well. With the iTunes cloud rumor in the air, the possibility of the iPod Touch supporting 3G is still there but highly doubtful at the same time as it would imply support for VoIP and we aren't sure Apple wants to hurt their iPhone sales. That being said, this suggests that some elements of portability will exist in the iTunes cloud service, so that users can carry some tracks with them when their devices are offline (a common feature found in Spotify, MOG, and others). Apple's next music event is probably going to be held in time for the holiday shopping season, most likely early September. Will iOS-enabled Apple TV also make an appearance? Only time will tell.
Stay tuned for more info on the topic by following us on Twitter and/or subscribing to our RSS feeds.
Recently many iPhone and iPod Touch users updated to iOS 4 firmware to get some of the new features such as multitasking, wallpapers, folders, etc including improved performance. However, many noticed that after updating to iOS 4, the iPhone 3G and iPod Touch 2G are actually lagging, having issues with performance, app compatibility, and crashing issues. On the other hand, iPhone 3GS and iPod TOuch 3G users are unable to jailbreak with iOS 4 already installed. If you want to downgrade iOS 4 to OS 3.1.3, 3.1.2, or older this guide is for you. This guide will help you learn how to downgrade our iPhone or iPod Touch with iOS 4 firmware to OS 3.1.3 or older firmware with TinyUmbrella. There is no need to edit any Hosts file that is require in other guides found on the internet. We are going to be setting up a downgrade server with a single click using TinyUmbrella.
IMPORTANT:
iPhone 3GS, iPod Touch 3G and iPod Touch 2G (MC) users MUST have SHSH blobs saved for 3.1.3/3.1.2/older firmware in order to downgrade. If you’ve SHSH blobs saved on Saurik servers via Cydia, you need to download them to your computer. To do that:
Connect your device, Fire up the TinyUmbrella (Download Link below-Step 1) and Check mark the Advanced Options.
Select your device, firmware (the one for which you’ve SHSH saved at Cydia; 3.1.3 or older) and Cydia as Location.
Hit the save My SHSH button. that’s it. (check: Where it saves SHSH)
(e.g: to download 3.1.2 shsh blobs from Cydia see the screenshot below)
How To Downgrade iOS 4 to OS 3.1.x Using TinyUmbrella:
*** Read the whole process first and then try.***
Step 1:
Required Stuff
Download TinyUmbrella and firmware 3.1.3 or 3.1.2 for iPhone 3GS, 3G, iPod Touch 3G, 2G from the links below:
Put your iPhone into DFU Mode (How to: enter DFU Mode)
Step 3:
Start TSS Server
iPhone 3G and iPod Touch 2G (Non-MC) please skip to step 4. iPhone 3GS and iPod Touch 3G and iPod Touch 2G (MC) users:
Run the TinyUmbrella
Hit the Display SHSH button to confirm that downloaded SHSH blobs has been cached by TinyUmbrella for 3.1.3 or 3.1.2. (If you already have them in your PC, drag and drop the SHSH blobs of 3.1.3 or 3.1.2 in the TinyUmbrella window then hit the display SHSH blobs button to confirm). See the screenshot below.
Then hit the Start TSS Server button
Step 4:
Restoring the Firmware
Now Open the iTunes.
Hold down the Shift (Windows)/Alt (Mac) key and hit the Restore button.
Select the downloaded firmware (from Step 1) and let the restore process complete.
iTunes will bring up error 1015, 1013 or 1011 message. Don’t worry, it’s normal. You’ve successfully downgraded your iPhone/iPod Touch firmware.
Step 5:
Getting Out of Recovery
Now in order to get out of recovery mode, hit the “Kick Device Out of Recovery” button on TinyUmbrella right below the Start TSS Server button. That’s it!
Now you can jailbreak iPhone OS 3.1.3 with Spirit, PwnageTool, Sn0wBreeze, RedSn0w and custom 3.1.3. To jailbreak iPhone OS 3.1.2 you can use RedSn0w, Sn0wBreeze, BlackRa1n, PwnageTool and custom 3.1.2.
You can always unlock iOS 4, 3.1.2, 3.1.3 on baseband 05.12.01, Baseband 05.13.04 and 05.11.07 using UltraSn0w 0.93.
Stay tuned for more jailbreak / unlock / downgrade guides and info by following us on Twitter and/or subscribing to our RSS feeds.
Another update has been released for the popular Sn0wbreeze 1.7 utility. The update allows jailbreaking for the iPhone 3GS new bootrom on iOS 4.0 and is available for download. With this release, you can jailbreak iPhone 3GS with new bootrom if it's on OS 3.1.2 or you've SHSH blobs saved for OS 3.1.2. In order to create a custom iOS 4 and go for 4.0 firmware successfully you have to be on OS 3.1.2+ jailbroken.
IMPORTANT:
First and foremost backup your data. We strongly recommend you to read through the release notes before proceeding.
iPhone 3GS with New BootRom users MUST be on firmware 3.1.2 or have SHSH blobs saved for it (needed for downgrade). Otherwise you’re still out of Luck. The exploit used in this hack has been patched in OS 3.1.3 so firmware 3.1.2 is a MUST. [How to Check iPhone 3GS BootRom]
If you’re not on 3.1.2 firmware or don’t have saved SHSH blobs for it, you’ll have to wait for the upcoming Spirit jailbreak update which is almost ready (probably when iOS 4.0.1 or 4.1 comes out).
For iPhone 3GS New BootRom users it’s a Tethered jailbreak. For those who don’t know, a tethered jailbreak device once turned off/Reboot/run out of battery, you need to connect it to computer and execute a tool to boot up the device.
This guide is NOT for regular Windows users. Proceed with precaution and follow the guide at your own risk. Here are the step by step instructions to jailbreak iPhone 3GS New BootRom to iOS 4 from the official source.
Sn0wBreeze 1.7 Supports:
iPhone 3GS (New & Old BootRom)
iPhone 3G
iPod Touch 3G
iPhone Touch 2G (MC & non-MC)
How To Jailbreak iOS 4 iPhone 3GS (New BootRom):
Required:
An iPhone 3GS – new bootrom
3.1.2 already installed or 3.1.2 installed via SHSH blobs. <– Broken blackra1n’d devices will work. (Especially if Spirit messed you up!).
Payload Pwner-r3 for the 3GS
Sn0wbreeze V1.7
iBooty V1.3
LibUSB (64-Bit users read carefully!!!)
Download iOS 4.0/3.1.2
Note:
If you have Sleep issue, you will need to restore back to 3.1.2 first.
If LinUSB is Not installed properly, your USB might no longer work!
Windows 32-Bit users: download this install — LibUSB Installer. Windows Vista/7 users RUNNING 32-Bit will have to run it in compatibility mode for Windows XP.
Winsows 64-Bit users: follow this tutorial — LibUSB 64-Bit
Once LibUSB is installed iRecovery should be able to function now.
STEP 2:Pwning iBEC + iBoot
Download this easy tool here — Payload Pwner-r3 for 3GS (It will help you create the payload + iBEC)
**Save the Payload + iBEC where iBooty is.**
STEP 3: Making a Custom IPSW
Download sn0wbreeze V1.7 from here — sn0wbreeze V1.7
USE EXPERT MODE!
In General, Checkmark “Disable NOR Flash” <– THIS IS ESSENTIAL!!
Build it. It will be on your Desktop.
**CUSTOM BOOT LOGOS THAT ARE MADE IN sn0wbreeze WILL NOT WORK ON NEW BOOTROMS!**
**Mac Users : PwnageTool does not have this option. I don’t think it will ever be in there. Use a Windows Virtual Machine or friends PC to create your firmware.**
STEP 4: iBooty Prep.
Most of you know of the utility “iBooty” that I made for Aki_nG. It will work as long as you place all of the correct files there.
Extract your Custom IPSW created by sn0wbreeze with 7-Zip or another un-archiver.
Grab the kernelcache and bring it into the same folder as ibooty.
Aswell as DeviceTree from the folder “Firmware\all_flash\all_flash.n88ap.production\DeviceTree.n88ap”
Rename your Kernel 4.0-Custom to “kernel.40″
Rename your iBEC 4.0-Custom to “ibec.40″
Rename your DeviceTree 4.0-Custom to “devtree.40″
Your folder should look like this:
- iboot.payload <– Created with Payload Pwner. - devtree.40 <– Grabbed from Custom IPSW made by sn0wbreeze. - ibec.40 <– Created with Payload Pwner. - irecovery.exe <– Comes with iBooty. - readline5.dll <– Comes with iBooty. - iBooty.exe <– Comes with iBooty. - kernel.40 <– Grab from Custom IPSW made by sn0wbreeze. - sn0w.img3 <– Comes with iBooty. - wait.img3 <– Comes with iBooty.
STEP 5: Restoring to 4.0 + Booting
Note:
Make sure your are on 3.1.2 when doing this step.
Run iBooty and Select “Prepare Device for Custom Firmware“. Run the Process and if you see the image, you can proceed!
Now open iTunes and restore to the custom ipsw.
**When done, your device will go into recovery mode. It won’t boot.**
STEP 6: Booting
Just Re-Run iBooty and select “Boot It”. If all goes well it will boot!
And you are all set to enjoy! Hopefully the dev, iH8Sn0w can get a tool out there that will make all of this much easier.
If you have an iPhone 3GS old BootRom, you can jailbreak using Sn0wBreeze 1.6, PwnageTool 4 and then unlock iOS 4 on baseband 05.12.01, Baseband 05.13.04 and 05.11.07 using UltraSn0w 0.93. And, stay tuned for more jailbreak and unlocking info by following us on Twitter and/or subscribing to our RSS feeds.
An update for the popular Sn0wBreeze jailbreak tool has been released. Sn0wBreeze v1.7 is the new version which allows jailbreak of iPod Touch 3G iOS 4. Sn0wBreeze v1.7 can create a custom iOS 4 to jailbreak iPod Touch 3G, but your iPod 3 must be on OS 3.1.2 or you must have saved SHSH blobs of OS 3.1.2 for your iPod Touch 3G.
Sn0wBreeze v1.7 Supports:
iPod Touch 3G only if they are running firmware 3.1.2 or you’ve SHSH blobs for 3.1.2 (needed for downgrade)
iPod Touch 2G (non-MC) and 1G
iPhone 3GS (Old BootRom + support for Spirit Jailbroken devices via Spirit2Pwn)
iPhone 3G and 2G
Note:
iH8Sn0w is the same guy behind the tools like f0recast, iDetector, and iREB. On the other hand Dev-Team is working on iPhone 4 baseband to unlock iPhone 4. However their RedSn0w 0.9.5 can jailbreak iPhone 3G and iPod Touch 2G on iOS 4. Comex has already developed an iPhone 4 jailbreak + jailbreak for all devices running iOS 4 including new bootroms. The jailbreak is yet to be released.
How to Jailbreak iPhone 3G iOS 4 with RedSn0w
How to Jailbreak iPod Touch 2G iOS 4 with RedSn0w
How to Jailbreak iPhone 3G iOS4 with Sn0wbreeze 1.6.2 and 1.6.1
Usually a number of raw apps are considered in mobile OS comparisons, but this time developers that are working behind the scenes are being compared. AppStore HQ today have gone through their dev directory and claimed to to compile a complete listing of all 55,000+ coders whose work is currently available for consumption in the Apple App Store and the Android Market. They were each put in a neat pile of Apple, Google, and Apple + Google programmers (Gapple). After seeing the chart put together, it is pretty visible to see that single-platform development is the norm (with Apple having more developers), but AppStore HQ also provides a list of some of the most well known and funded apps doing the cross-platform developing. The company suggests that a movement is on its way, one that makes software available for both sets of users. VentureBeat, another company has extrapolated the following numbers from the chart:
43,185, or 80 percent, develop solely for Apple’s iOS.
8,787, or 17 percent, develop solely for Google’s Android platform.
1,412, or 3 percent, develop for both.
The company believes that Google has made it hard for Android developers to make profit compared to Apple developers but they have seen that customers and money is still there to be made. With the number of apps increasing steadily for the Android Market as well, it's a matter of time to see if things remain the same or whether the movement is really about. What do you think? Share your thoughts and comments below.
Several iPhone 3G users have discovered that iOS 4 makes their iPhone slow down and lag too much. If you are one of the people who have decided that the new iOS 4 features aren't worth the slower load times and the lag, then here are the steps to follow to downgrade your iDevice.
Note: The process works the same way on both Windows and the Mac OS X. The only difference between the two is RecBoot. If you are a Windows user, pay close attention to the RecBoot process before diving in. Also, please read through the whole guide before following it, so you have an idea of what to do throughout.
IMPORTANT:
This guide may not offer consistent results. So please proceed at your own risk.
Do not forget to backup your iPhone before you proceed. You can refer to this post for instructions on how to backup your iPhone 3G.
This procedure is strictly for iPhone 3G users. Apple has stopped signing the iOS 3.1.3 firmware and hence this guide will not work on iPhone 3GS as Apple has stopped signing the older iPhone OS 3.1.3 files that is required to restore iPhone 3GS.
How To Downgrade iPhone 3G From iOS 4 To iPhone OS 3.1.3:
Step 1: Download iPhone OS 3.1.3
In all likelihood, users may already have a copy of the older iOS firmware stored on their computer. If you are a Mac user, navigate to ~/Library/iTunes/iPhone Software Updates and look out for a file named iPhone1,1_3.1.3_7E18_Restore.ipsw or iPhone1,2_3.1.3_7E18_Restore.ipsw. Windows users may check out this file at C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPhone Software Updates. Alternately, you can click here to download a fresh copy of the iPhone OS 3.1.3 firmware to your computer.
Save a copy of this iOS firmware on your computer desktop
Step 2 : Download RecBoot
RecBoot is an important utility that will help in completing the downgrade process. Download this tool by clicking here and save it to your computer desktop.
Step 3 : Set iPhone To DFU Mode
(a) Plug your iPhone to the computer
(b) Switch OFF the iPhone by pressing the Sleep/Wake button. Swipe across the 'Slide to Power Off' option to turn your iPhone off
(c) With the Sleep/Wake button pressed, press and hold the iPhone Home button for ten seconds.
(d) You can now release the Sleep/Wake button while the Home button is kept in the pressed state.
(e) iTunes will display a window that reads, "iTunes has detected an iPhone in recover mode". The iPhone screen will now turn black. This indicates that your iPhone is in the DFU mode. Click 'OK' to close the iTunes pop-up message
Step 4: Restore iPhone 3G using iPhone OS 3.1.3 firmware
(a) Under the 'Devices' section on the left pane of iTunes, click on your iPhone device.
(b) Hold the Option/Alt key down and click on the 'Restore' button
(c) Navigate to the computer desktop and click on the downloaded iPhone OS 3.1.3 firmware to restore.
(d) iTunes will now begin the restoration process. This process will take close to 10 minutes or more for completion.
(e) iTunes might throw 1011, 1013 or 1015 error as seen below. You don't have to panic. It's normal, just ignore this error as the firmware has been successfully installed on your iPhone 3G. You need to use RecBoot utility to exit out of recovery mode.
Step 5: Exiting Recovery Mode
For Mac users:
Navigate to your computer desktop and launch RecBoot. Click 'Exit Recovery Mode'. This will reboot the iPhone to the newly downgraded iPhone OS 3.1.3.
For Windows users:
(a) You may require .NET 4.0 firmware for the application to work. Click here to download Microsoft .NET 4 firmware.
(b) Navigate to the desktop. Right click on RecBoot and choose Properties -> Compatibility -> Run this program in compatibility mode -> Windows XP. You may skip this step if you are already on a Windows XP platform.
(c) Click here to download and install Libusb. You can checkout this link if you're trying this on a 64-bit system.
(d) From the computer desktop, launch RecBoot. Select the 'Exit Recovery Mode' option. This will reboot your iPhone to the downgraded iOS 3.1.3 platform
Step 6: Restoring Backup
iTunes will now prompt you to set up your iPhone. You can restore from a backup that you had created before upgrading to iOS 4 to sync your apps and data or set it up as a new iPhone. Please note that it is only possible to sync with a pre-4.0 backup. Any backup file created after upgrading to iOS 4 might not be supported.
The downgrade process is complete.
Do not forget to drop us a line about how it goes in the comments below. And, stay tuned for more news and info by following us on Twitter and/or subscribing to our RSS feeds.